Multiphysics Analysis of Exhaust Header 
A temperature distribution from a heat transfer analysis was coupled to a static stress analysis to determine the heat transfer stresses induced by heat from exhaust gases. 
Play Now: Low   Medium   High  (Bandwidth) 
http://www.algor.com/products/analysis_replays/tsheader/_asf/tsheader100.asf
--------------------------------------------------------------------------------
 
     Multiphysics Analysis of a Tank Cylinder Head 
Adiabatics, Inc. used multiphysics analysis to locate a critically-stressed region between the two exhaust valves in this US Army tank engine cylinder head. As a result, design changes were proposed to increase the reliability of the engine in combat operation. 
Play Now: Low   Medium   High  (Bandwidth) 
http://www.algor.com/products/analysis_replays/adiabatics/_asf/adiabatics100.wmv
--------------------------------------------------------------------------------
 
     Design Optimization of a Support Bracket 
Full associativity between ALGOR and Pro/ENGINEER facilitated this design optimization of a support bracket. A series of linear static stress analyses was used to examine the impact of large-scale geometry changes from design iterations on the stress distribution patterns and verify that safe stress levels were maintained.  
Play Now: Low   Medium   High  (Bandwidth)     http://www.algor.com/products/analysis_replays/supportbracket/_asf/supportbracket100.wmv
--------------------------------------------------------------------------------
 
     Linear Static Stress Analysis of Aluminum Automobile Wheel 
Goodyear engineers performed a linear static stress analysis on this aluminum automobile wheel, modeled in Pro/ENGINEER, in order to verify that safe stress levels were maintained in the wheel at zero inflation pressure for a new "run-flat" tire design. 
Play Now: Low   Medium   High  (Bandwidth)     http://www.algor.com/products/analysis_replays/goodyear/_asf/goodyear100.wmv
--------------------------------------------------------------------------------
 
     Linear Static Stress Analysis of a Motorcycle Piston 
In this linear static stress analysis of a motorcycle piston, a pressure of 1000 psi was applied to the top of the piston to determine the stress distribution during combustion. The piston was modeled in the Pro/ENGINEER CAD solid modeler. 
Play Now: Low   Medium   High  (Bandwidth)     http://www.algor.com/products/analysis_replays/piston/_asf/piston100.wmv
--------------------------------------------------------------------------------
 
     Natural Frequency Analysis of Welding Horn 
A natural frequency analysis was performed on this ultrasonic horn in order to determine the mode shapes and frequency values near the target resonant frequency of 20,000 Hertz. 
Play Now: Low   Medium   High  (Bandwidth)     http://www.algor.com/products/analysis_replays/horn/_asf/horn100.wmv
--------------------------------------------------------------------------------
 
     Frequency Response Analysis of a Piping System 
A frequency response analysis was performed on this section of a piping system to determine its dynamic response to a sinusoidal force generated by a pump in the system.  
Play Now: Low   Medium   High  (Bandwidth) 
http://www.algor.com/products/analysis_replays/piperun/_asf/piperun100.wmv
--------------------------------------------------------------------------------
 
     Transient Heat Transfer Analysis of an Exhaust Header 
A transient heat transfer analysis was performed on this automobile exhaust header, modeled in Pro/ENGINEER, to determine how quickly the header would heat up once the engine was started.  
Play Now: Low   Medium   High  (Bandwidth) 
http://www.algor.com/products/analysis_replays/exhaustheader/_asf/exhaust100.asf