請教各位高手..... 在C++的AnsiPos使用起來無法達到目的,只是要用Builder把一篇文章中的*號及>符號代換成space鍵.先把文章Load到ListBox1,再把符號做成的一篇文章Load到ListBox2,用以下的程式碼做代換,但是沒動作.是程式寫錯?多多指教.    char *chars; char chartostr[1024]; int linenum1,linenum2,position,length; char const *Path1 = "d:\\test.txt"; char const *Path2 = "d:\\symbol.txt"; ListBox1->Items->LoadFromFile(Path1); ListBox2->Items->LoadFromFile(Path2); linenum1=ListBox1->Items->Count; linenum2=ListBox3->Items->Count;    for(int i=0;iItems->Strings[i]->Text).AnsiPos(ListBox2-Items->Strings[ii]); if(position!=0){ ListBox1->Items->Strings[ii].Delete(position,1); ListBox1->Items->Strings[ii].Insert(" ",position); } } } 發表人 - 111111dd 於 2003/12/13 20:24:18

int cnt,n;
String temp,temp2,ch[2]={"*",">"};
cnt=ListBox1->Items->Count;      for (int i=0;iItems->Strings[i];
    for (int j=0;j<2;j  )
    {
      temp2="";
      while (temp.Pos(ch[j]) != 0)
      {
        temp2=temp2 temp.SubString(1,temp.Pos(ch[j])-1)   " ";
        temp=temp.Delete(1,temp.Pos(ch[j]));
      }
      temp = temp2 temp;
    }
    ListBox2->Items->Add(temp);
  }
 

試試上面的程式能不能符合您的功能 學習中請大家多多指導呦~~ ☆星霧☆（Mineg Chien WU）

引言: 請教各位高手..... 在C++的AnsiPos使用起來無法達到目的,只是要用Builder把一篇文章中的*號及>符號代換成space鍵.先把文章Load到ListBox1,再把符號做成的一篇文章Load到ListBox2,用以下的程式碼做代換,但是沒動作.是程式寫錯?多多指教. char *chars; char chartostr[1024]; int linenum1,linenum2,position,length; char const *Path1 = "d:\\test.txt"; char const *Path2 = "d:\\symbol.txt"; ListBox1->Items->LoadFromFile(Path1); ListBox2->Items->LoadFromFile(Path2); linenum1=ListBox1->Items->Count; linenum2=ListBox3->Items->Count; for(int i=0;iItems->Strings[i]->Text).AnsiPos(ListBox2-Items->Strings[ii]); if(position!=0){ ListBox1->Items->Strings[ii].Delete(position,1); ListBox1->Items->Strings[ii].Insert(" ",position); } } }

111111dd 你好: 請參考以下的做法 < class="code"> int i=0; AnsiString sz; TStringList *sl=new TStringList; sl->LoadFromFile("Src.txt"); for(i=0; iCount; i++) { sz=sl->Strings[i]; sz=StringReplace(sz, "*", " ", TReplaceFlags()<", " ", TReplaceFlags()<Strings[i]=sz; } sl->SaveToFile("Dst.txt"); delete sl; -- Enjoy Researching & Developing --

linenum1=ListBox1->Items->Count;
linenum2=ListBox2->Items->Count;      for(int i=0;iItems->Strings[i].AnsiPos(ListBox2->Items->Strings[ii]);
      while(position!=0)
      {
        ListBox1->Items->Strings[i]=ListBox1->Items->Strings[i].Delete(position,1);
        ListBox1->Items->Strings[i]=ListBox1->Items->Strings[i].Insert(" ",position);
        position = ListBox1->Items->Strings[i].AnsiPos(ListBox2->Items->Strings[ii]);
      }
    }
  }
 

上一篇好像搞錯了，這個應該才是您要的吧，紅色的是您錯誤的地方， 其中if要改成while不然每次就只會轉一個字 學習中請大家多多指導呦~~ ☆星霧☆（Mineg Chien WU）

有看到結果了, 還是用 while (temp.Pos(ch[j]) != 0) { temp2=temp2 temp.SubString(1,temp.Pos(ch[j])-1) " "; temp=temp.Delete(1,temp.Pos(ch[j])); } 比AnsiPos明確. 感謝mieng兄,值得升為五星上將.

感謝mieng,RaynorPao  用   sz=StringReplace(sz, "*", " ", TReplaceFlags()<", " ", TReplaceFlags()<