全國最多中醫師線上諮詢網站-台灣中醫網
發文 回覆 瀏覽次數:2237
推到 Plurk!
推到 Facebook!

請問這是什麼錯誤訊息..

 
kateantony
一般會員


發表:10
回覆:10
積分:4
註冊:2005-02-28

發送簡訊給我
#1 引用回覆 回覆 發表時間:2005-10-31 11:00:51 IP:61.62.xxx.xxx 未訂閱
我已快被搞到受不了, 平均run 2 次, 出現一次,請問這是那出錯, 要如何處理,謝謝您..
acqua
一般會員


發表:3
回覆:24
積分:20
註冊:2005-09-13

發送簡訊給我
#2 引用回覆 回覆 發表時間:2005-10-31 14:44:25 IP:61.218.xxx.xxx 未訂閱
看來好像是 Borland 本身的 BDE 出錯了 你要不要把 BDE 重灌一下看看會不會 OK 對了 聽說 BDE新舊版本之間會衝突... 所以也順便檢查一下 你BDE的版本吧....:>
kateantony
一般會員


發表:10
回覆:10
積分:4
註冊:2005-02-28

發送簡訊給我
#3 引用回覆 回覆 發表時間:2005-10-31 16:01:39 IP:61.62.xxx.xxx 未訂閱
dear delphi 7 而 bde 5.01 哪有新的bde? 謝謝您
pceyes
尊榮會員


發表:70
回覆:657
積分:1140
註冊:2003-03-13

發送簡訊給我
#4 引用回覆 回覆 發表時間:2005-10-31 17:11:54 IP:220.132.xxx.xxx 未訂閱
Shared memory conflict ($210D) Problem: The BDE is trying to use a location in memory that is already in use by the operating system or another application. Solution: 1) Close all BDE applications. 2) Find the program BDEADMIN.EXE. This is usually in a directory somewhere under "\Program Files\Borland...". 3) Run BDEADMIN.EXE and click on the Configuration tab. 4) There should be an item in the treeview on the left side called "Configuration". If it's not expanded, expand it. 5) Next, expand the System entry below it. Under System, select INIT. 6) In the right-side window, find the entry called "SHAREDMEMLOCATION". Change this value to 5BDE. 7) Next, click on the word "Object" in the main window's menu bar, and select Apply. 8) Answer "OK" to the confirmation to "Save all edits...". Other values that may also help solve this issue on NT or Windows 2000 are: 1000, 7000, and 7F00. If none of these values resolve the issue, you may try 2000, 3000, 4000, etc. or any values in between the specified ranges below for each operating system: Windows 95/98: SHAREDMEMLOCATION = 9000 to FFFF Windows NT/2000: SHAREDMEMLOCATION = 1000 to 7F00 It has also been reported by some users that removing or disabling the driver for a sound card on Windows NT can resolve the issue as well, but normally just "relocating" the BDE's memory pool using the SHAREDMEMLOCATION setting will suffice. 努力會更接近成功
------
努力會更接近成功
kateantony
一般會員


發表:10
回覆:10
積分:4
註冊:2005-02-28

發送簡訊給我
#5 引用回覆 回覆 發表時間:2005-11-01 09:09:30 IP:61.62.xxx.xxx 未訂閱
謝謝您!! 還是不行 我的機器在開機時 MEMORY TEST 就出現 64MB SHARE MOMORY, 256的RAM剩192.. 還有OS 是 XP-SP2, SHAREDMEMLOCATION =要設定多少呢??
acqua
一般會員


發表:3
回覆:24
積分:20
註冊:2005-09-13

發送簡訊給我
#6 引用回覆 回覆 發表時間:2005-11-02 17:21:43 IP:61.218.xxx.xxx 未訂閱
我也是 Delhpi7.0 bde 5.1 可是我找不到 BDEAdmin.exe 呀
kateantony
一般會員


發表:10
回覆:10
積分:4
註冊:2005-02-28

發送簡訊給我
#7 引用回覆 回覆 發表時間:2005-11-02 20:27:54 IP:220.142.xxx.xxx 未訂閱
dear bdeadmin.exe 就是 program file->delphi7->dbe
kateantony
一般會員


發表:10
回覆:10
積分:4
註冊:2005-02-28

發送簡訊給我
#8 引用回覆 回覆 發表時間:2005-11-02 20:33:41 IP:220.142.xxx.xxx 未訂閱
dear all 我想關鍵在於os,我已把 os 從xp sp2改為2000 pro. 問題就解決了.. 謝謝各位...
acqua
一般會員


發表:3
回覆:24
積分:20
註冊:2005-09-13

發送簡訊給我
#9 引用回覆 回覆 發表時間:2005-11-03 09:05:51 IP:61.218.xxx.xxx 未訂閱
喔~~ 原來 BDEAdmin.exe 是指 BDE Administrator(捷徑上那個名子) 說真的用了那麼多次...第一次知道他的執行檔名 and 照pceyes的說法,, SHAREDMEMLOCATION 要設成 5BDE 我剛試過 可以設這樣...不過不知是何意義就是啦(大概只有Borland知道吧) and 我的路徑是在 program file\Common Files\Boland Shared\BDE\ 難怪我都一直找不到...(我也是用default值灌的) and 我覺得這題答題分...應該還是 pceyes
acqua
一般會員


發表:3
回覆:24
積分:20
註冊:2005-09-13

發送簡訊給我
#10 引用回覆 回覆 發表時間:2005-11-03 10:29:49 IP:61.218.xxx.xxx 未訂閱
以下 是我們公司一位資深的前輩所回答的 : 關於 BDE $210D 的錯誤依照我們之前的處理經驗是 BDE sharememory的位置 與該電腦的音效卡位置衝突到了,一般是調整 BDE-> SharedMemoryLocation的值即可解決
kateantony
一般會員


發表:10
回覆:10
積分:4
註冊:2005-02-28

發送簡訊給我
#11 引用回覆 回覆 發表時間:2005-11-03 12:28:48 IP:221.169.xxx.xxx 未訂閱
dear 我試過好幾個位址都沒成功過,有什麼方法可以幫助我找到正確的位址. 我試過5BDE, 1000~9000, FFFF 都失敗...
acqua
一般會員


發表:3
回覆:24
積分:20
註冊:2005-09-13

發送簡訊給我
#12 引用回覆 回覆 發表時間:2005-11-04 10:14:55 IP:61.218.xxx.xxx 未訂閱
SHAREDMEMLOCATION的設定方法 The errors are "shared memory conflict" and "insufficient memory to complete this operation" respectively.    I assume that "several Delphi 7's running" means several programs created with Delphi7 not several instances of the Delphi 7 IDE. You need to change the SharedMemLocation and SharedMemSize in the BDE Administrator. Try 0x5BDE and 4096. If that does not work try some of the other locations suggested in the on-line help. --第二則-- Try changing the SharedMemSize setting to 4096 and the SharedMemLocation to  0x½E. If that does not work try some of the other locations in the BDE Administrator help file.
kateantony
一般會員


發表:10
回覆:10
積分:4
註冊:2005-02-28

發送簡訊給我
#13 引用回覆 回覆 發表時間:2005-11-04 11:38:10 IP:221.169.xxx.xxx 未訂閱
謝謝您 由於急著工作, 已將xp sp2環境移除, 我找時間再try try ..
系統時間:2024-03-29 15:54:50
聯絡我們 | Delphi K.Top討論版
本站聲明
1. 本論壇為無營利行為之開放平台,所有文章都是由網友自行張貼,如牽涉到法律糾紛一切與本站無關。
2. 假如網友發表之內容涉及侵權,而損及您的利益,請立即通知版主刪除。
3. 請勿批評中華民國元首及政府或批評各政黨,是藍是綠本站無權干涉,但這裡不是政治性論壇!